Stretch Wrappers by Phoenix
Phoenix, The Stretch Wrapping Experts PackExpo 2016 Phoenix Blog
  Phoenix Non Conveyorized Rotary Arm Automatic Pallet Wrapper - Cantilevered Frame
 

PRTL-2150A

 
PRTL-2150A Pushbutton Control Panel
 
Here’s how we design our controls to stand-out.
 
  • The PRTL-2150A Stretch Wrapper is controlled using an Allen Bradley PLC with pushbutton and selector switches..
  • Independent Variable speed up/down carriage control.
    This feature is often overlooked, but provides more film application control and realized film savings. More expensive automatic wrappers provide this feature and we provide it with our Semi-automatics also as it allows you to start the cycle by moving upward at full speed. This ensures the load gets a spiral wrap applied while getting the carriage to the top of the load as fast as possible. This allows you to contain the top of the load which is typically the most unstable. Once the top wraps are complete you are then able to travel downward at a reduced wrapping speed to ensure that the required film is applied to contain the load. Most competitors provide only one speed, forcing you to move upward at the same slow rate as on the way down causing more film to be applied unecessarily. Again adding extra cost to each pallet wrapped.

  • Separate Top & Bottom wrap counters from 1-9.
    This provides the maximum flexibility for all your wrapping needs. Most competitive models offer a single 1 to 3 wrap selector switch which limits your capability to meet your customers requirements. For example:
    Many pallet loads require more than just three wraps applied to the top. Many retail customers supply specs that require 4 or 5 revolutions on the top. This is not possible with many competitive models.
    Very often different amounts of film need to be applied to the top of the load and the bottom. You may require 3 top waps and only 1 bottom wrap. This again is not possible with competitive models as you are forced to put the same amount of film on the bottom as you did on the top. Applying extra film where it is not needed dramatically increases your film cost per pallet.

    Don't be limited in your ability to meet any of your customers requirements. With Phoenix, we understand the demands customers face and provide this flexibility.

  • Multiple wrap patterns to select from: Including Wrap Up/Down and Wrap Up Only, Cycle pause and Re-Inforce Wrap. Just to give you added flexibility to meet your customer's requirements.
  • Variable Speed Drive for Turntable Speed.
  • Pushbutton and Selector Switches.
  • Autoheight Photo-Eye for Variable Load Height detection with adjustment slide for easy changes.
  • Film Force to Load (Tension) Control
  • Power on/Off, Large E-Stop, Pause Cycle, Jog Controls for Carriage up/down and turntable.
  • Broken film alarm lets you know when the stretch film runs out. It stops the carriage travel where it was during the cycle and allows you to continue where you left off when the roll is changed.
  • Reinforce wrap button applies more film anytime during the wrap cycle when extra film is needed.
What you might see with competitive models:
 
   
CONTROL PANEL
Phoenix PRTL-2150A Stretch Wrapper Pushbutton Control Panel
The PRTL controls features an Allen Bradley PLC with pushbutton and selector switches
 
FILM CARRIAGE
Phoenix PRTL-2150A Stretch Wrapper Easy Threading Prestretch Film Carriage
20" Easy Threading Powered Prestretch Film Carriage.
 
ROTARY ARM
Phoenix PRTL-2150A Stretch Wrapper Rotary Arm and Carriage Lift System
Dual Boom Rotary Arm and Carriage Lift System.
 
 
RING BEARING DRIVE
Phoenix PRTL-2150A Stretch Wrapper Rotary Commutator
 
Ring bearings are used on motor cranes, hydraulic excavators, foundry equipment, and army tanks due to their ability to withstand harsh environments while supporting large oversized structures.
 
CLAMP CUT AND WIPE
PRTL-2150A Clamp Cut and Brush
Pneumatic Controlled Cut & Wipe System automatically cuts the film and applies the film tail to the load.