| OPTION CODE |
OPTION DESCRIPTION |
| PHRT1016 |
20" Film Adaptor on 30" Carriage
- Allows the operator to run 20" film on a 30" carriage frame.
|
| PHLP1002B |
Touchscreen Panel Upgrade Features Includes:
- Touchscreen Control.
- Alarm Diagnostics and Alarm History.
- Password Protected Wrap settings.
- Selectable Over-Wrap Adjustment.
- Multiple Wrap Patterns including Wrap Up/Down, Wrap up only and Top Cover Pause.
- Total Pallet Wrapped Counter.
|
| PHRT1004 |
Dark Load Special Auto-Height Photo Eye
- Replaces standard photoeye.
- Background suppression for dark (black, green, brown colours) and/or shiny loads.
|
| PHRT1006 |
PRT-2200 Extended Wrap Height - 96"
- Replaces standard wrap height of 80".
|
| PHRT1006A |
PRT-2200 Extended Wrap Height - 102"
- Replaces standard wrap height of 80".
|
| PHRT1006B |
PRT-2200 Extended Wrap Height - 116"
- Replaces standard wrap height of 80".
|
| PHRT1008 |
PRT-2200 Extended Wrap Diameter - 92"
- Replaces standard wrap diagonal 80".
|
| PHRT1008A |
PRT-2200 Extended Wrap Diameter - 104"
- Replaces standard wrap diagonal 80".
|
| PHRT1011 |
Cold Temperature Package #1 to 0 Degrees C° (32F)
Includes:
- Thermostatically controlled panel heater to maintain proper operating temperatures.
|
| PHRT1012 |
Cold Temperature Package #2 to -25 Degrees C° (-13F)
Includes:
- Thermostatically controlled panel heater to maintain proper operating temperatures.
- Special cold temp rated wiring.
|
| PHRT1013 |
Cold Temperature Package #3 to -33 Degrees C° (-29F)
Includes:
- Thermostatically controlled panel heater to maintain proper operating temperatures.
- Tower is completely insulated.
- Special cold temp rated wiring.
- Motor Heaters for all (3) Motors.
|
| PHRT1001 |
30" Powered Pre-Stretch Film Carriage Upgrade
- Replaces standard 20" carriage
|
| PHRT1002 |
Automatic End Of Cycle Film Cut-Off
- This time saving feature allows the operator to remain on his lift, the film is cut automatically within the film carriage.
|
| PHRT1020 |
Safety Fencing Including Photo-Eye For PRT Series
- Fencing covers two sides of the machine.
- One photoeye at the entrance of the machine located approx 24"-30" from floor level. Back of machine intended to be installed close to a wall to limit access.
- Extra fencing is available at extra cost.
|
