| |
|
|
|
| |
PHRT1002 |
|
Automatic End of Cycle Film Cut-Off |
| |
|
|
This time saving feature allows the operator to remain on his lift, the film is cut automatically within the film carriage. |
| |
|
|
|
| |
PHRT1001 |
|
30" Powered Pre-Stretch Film Carriage Upgrade |
| |
|
|
Replaces standard 20" carriage. |
| |
|
|
|
| |
PHRT1004 |
|
Dark Load Special Auto-Height Photo Eye |
| |
|
|
Replaces standard photoeye.
Background suppression for dark(black,green, brown colours) and/or shiny loads.
|
| |
|
|
|
| |
PHRT1000 |
|
Extended Wrap Height - 96" |
| |
|
|
Replaces standard wrap height of 80". |
| |
|
|
|
| |
PHRT1000A |
|
Extended Wrap Height - 102" |
| |
|
|
Replaces standard wrap height of 80".
|
| |
|
|
|
| |
PHRT1000B |
|
Extended Wrap Height - 116" |
| |
|
|
Replaces standard wrap height of 80". |
| |
|
|
|
| |
PHRT1007 |
|
Extended Wrap Diameter - 92" |
| |
|
|
Replaces standard wrap diagonal 80". |
| |
|
|
|
| |
PHRT1007A |
|
Extended Wrap Diameter - 104" |
| |
|
|
Replaces standard wrap diagonal 80". |
| |
|
|
|
| |
PHRT1007B |
|
Extended Wrap Diameter - 116" |
| |
|
|
Replaces standard wrap diagonal 80". |
| |
|
|
|
| |
PHRT1011 |
|
Cold Temperature Package # 1 to 0 Degrees C° (32F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures.
Note: Machine must be left "on" to prevent condensation problems.
* certain options not offered with Cold Pkg.
|
| |
|
|
|
| |
PHRT1012 |
|
Cold Temperature Package # 2 to - 25 Degrees C° (-13F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures.
Panel Insulation.
Special cold temp rated wiring Note; machine must be left "on" to prevent condensation problems.
* Certain options not offered with Cold Pkg.
|
| |
|
|
|
| |
PHRT1013 |
|
Cold Temperature Package # 3 to - 33 Degrees C (-29F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures.
Tower is completely insulated.
Special cold temp rated wiring.
Motor Heaters for all (3) Motors.
Note: Machine must be left "on" to prevent condensation problems.
* Certain options not offered with Cold Pkg.
|
| |
|
|
|
| |
PHRT1020 |
|
Safety Fencing Including Photo-Eye For PRT SEMI's |
| |
|
|
Fencing covers two sides of the machine (approx 12 feet each side).
One retro-reflective photoeye at the entrance of the machine located approx 24" to 30" from floor level.
Back of machine intended to be installed close to a wall to limit access. |
| |
|
|
|
| |
PHLP1018 |
|
Custom Paint Colour for Basic Semi Automatic |
| |
|
|
Enamel paint for base machine (paint chip and/or spec. required) |
| |
|
|
|
| |
PHLP1018A |
|
Epoxy Based Paint for Basic Semi Automatic |
| |
|
|
Required in corrosive environment. |
| |
|
|
|
| |
PHRT1005 |
|
20" Film - Manual Carriage Roping Bar (Single) |
| |
|
|
Manually adjustable roping bar mounted on a slide allows the film to be roped down providing extra strength. |
| |
|
|
|
| |
PHRT1005A |
|
30" Film - Manual Carriage Roping Bar (Single) |
| |
|
|
Manually adjustable roping bar mounted on a slide allows the film to be roped down providing extra strength. |
| |
|
|
|
