| |
|
|
|
| |
PHLP1003 |
|
Standard Duty Loading Ramp |
| |
|
|
2ft flat portion, 4ft incline x 48" wide - can be mounted on either of the three sides of the turntable. |
| |
|
|
|
| |
PHLP1004B |
|
Heavy Duty Loading Ramp (6,000 Lb Capacity) for Transpallet Use |
| |
|
|
2ft flat portion, 4ft incline x 48" wide - can be mounted on either of the three sides of the turntable. |
| |
|
|
|
| |
PHLP1002A |
|
PLC Control Upgrade - Touchscreen Panel Controls |
| |
|
|
The Microprocessor controlled Touch Panel is replaced with an Omron PLC with pushbutton and selector switches. (On models 2150, & 2300 only) |
| |
|
|
|
| |
PHLP1009 |
|
Extended Tower - 92" Wrap Height |
| |
|
|
Usually applied for Pit Mounting applications.
|
| |
|
|
|
| |
PHLP1008 |
|
Anti Skid Table Surface |
| |
|
|
|
| |
PHLP1009A |
|
Extended Tower - 104" Wrap Height |
| |
|
|
Replaces standard wrap height of 80". |
| |
|
|
|
| |
PHLP1009B |
|
Extended Tower - 116" Wrap Height |
| |
|
|
Replaces standard wrap height of 80".
|
| |
|
|
|
| |
PHLP1019 |
|
Dark Load Special Auto-Height Photo Eye |
| |
|
|
Replaces standard photoeye.
Background suppression for dark(black,green, brown colours) and/or shiny loads. |
| |
|
|
|
| |
PHLP1011 |
|
Automatic End of Cycle Film Cut-Off |
| |
|
|
This time saving feature allows the operator to remain on his lift, the film is cut automatically. |
| |
|
|
|
| |
PHLP1007 |
|
30" Powered Pre-Stretch Carriage Upgrade |
| |
|
|
Replaces 20" Standard.
|
| |
|
|
|
| |
PHLP1016 |
|
Hinged Fold Down Tower Option |
| |
|
|
Note: Included with 116" Tower extension only.
Optional for 96" and 104" extensions. |
| |
|
|
|
| |
PHLP1003A |
|
Special Ramp for Scale - Pallet Jack Loading |
| |
|
|
2ft flat portion, 4ft incline x 48" wide - can be mounted on either of the three sides of the turntable. |
| |
|
|
|
| |
PHLP1020 |
|
Cold Temperature Package # 1 to 0 C° (32F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures.
Note: machine must be left "ON" to prevent condensation problems.
* certain options not offered with Cold Pkg. |
| |
|
|
|
| |
PHLP1020A |
|
Cold Temperature Package # 2 to - 25 Degrees C° (-13F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures - Panel Insulation.
Special cold temp rated wiring.
Note: machine must be left "ON" to prevent condensation problems.
* certain options not offered with Cold Pkg.
|
| |
|
|
|
| |
PHLP1020B |
|
Cold Temperature Package # 3 to - 33 C° (-29F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures - Tower is completely insulated.
Special cold temp rated wiring.
Motor Heaters for all (3) Motors.
Note: machine must be left "ON" to prevent condensation problems.
* certain options not offered with Cold Pkg. |
| |
|
|
|
| |
PHLP1018 |
|
Custom Paint Colour for Basic Semi Automatic |
| |
|
|
Enamel paint for base machine (paint chip and/or spec. required)
Note: applicable for PLP and PHP basic models (options may add extra cost). |
| |
|
|
|
| |
PHLP1018A |
|
Steel-It Paint for Basic Semi Automatic |
| |
|
|
Note: applicable for PLP and PHP basic models (options may add extra cost). |
| |
|
|
|
| |
PHLP1017 |
|
Electronic Scale Package |
| |
|
|
Modifications to the Machine frame to accept the scale system with reinforcing base plate and structural tubing.
4-Point load cell system for accurate weight measurement. Precise to 1lb with percentage of error at 1/10%.
Electronic Digital Display.
Stainless Steel washdown Nema 4X Indicator Enclosure.
RS232 serial bi-directional communication port. |
| |
|
|
|
| |
PHLP1014 |
|
67" Dia. Round Turntable Upgrade |
| |
|
|
Replaces standard 58" Table.
Load capacity 5,000 lbs. |
| |
|
|
|
| |
PHLP1021 |
|
Electric Top Platen for Variable Load Height. |
| |
|
|
Stabilizes unstable loads for wrapping. Once the load is placed on the wrapper table, the top platen is lowered down onto the top of the product to be wrapped. This foam covered platen ensures that the load will not tip or move during the wrapping cycle. With the load fully secured, the wrapping cycle can commence. Once wrapped the top platen is raised to allow for pallet removal.
Foam padded top platen. |
| |
|
|
|
| |
PHLP1026A |
|
Dual Turntable Option |
| |
|
|
Extra 58" Diameter "Keyhole" Turntable with base drive.
Extra Autoheight photoeye for load height detection on 2nd table.
Toggle switch to select active table when wrapping.
Machine tower located in the center of the two tables on a separate base. Requires anchoring to the floor. |
| |
|
|
|
| |
PHLP1002 |
|
Buttons & Switches Instead of Operator Interface |
| |
|
|
The Operator Interface and PLC is replaced with an Allen Bradley PLC with pushbutton and selector switches on model 2150 only. |
| |
|
|
|
| |
PHLP1022 |
|
Single "Rope Down" Pneumatic Roping |
| |
|
|
A pneumatic cylinder with a roping assembly is mounted on the film carriage. During the cycle, a solenoid valve activates the roping mechanism allowing the film to be gathered, forming a rope at the bottom of the carriage frame.
This reinforces the film to the pallet, in the case of tab folding, holds the tabs to the load more securely than just a film web. ** If spiral wrap roping of the load is required over the height of the load, additional charges will apply for added features.
Includes roping on/off control on the panel. |
| |
|
|
|
| |
PHLP1022A |
|
Dual "Rope Up/Down" Pneumatic Roping |
| |
|
|
A pneumatic cylinder with a roping assembly is mounted on the film carriage. During the cycle, a solenoid is engaged allowing the film to be gathered, forming a rope at the bottom or top of the carriage frame. This reinforces the film to the pallet, in the case of tab folding, holds the tabs to the load more securely than just a film web.
Includes roping on/off control . |
| |
|
|
|
| |
PHLP1036 |
|
CSST - Film Carriage Modifications |
| |
|
|
Modified carriage access door with electrical interlocked switch. |
| |
|
|
|
| |
PHLP1005 |
|
Base Extension for Low Profile ( Price per Foot ) |
| |
|
|
Note: Maximum 3 Foot Extension available. |
| |
|
|
|
| |
PHLP1015 |
|
Split Base (Tower Mounted Separately) |
| |
|
|
Allows for larger load sizes to be wrapped on the system.
Includes extended wiring harness from Turntable to the Control Tower. |
| |
|
|
|
| |
PHLP1006 |
|
Boxed Base Surround Plating for 58" dia |
| |
|
|
Necessary for Pit Mounting applications and also required for Scale packages
|
| |
|
|
|
