| |
|
|
|
| |
PHHP1003 |
|
30" Powered Pre-Stretch Film Carriage Upgrade |
| |
|
|
Replaces standard 20" carriage. |
| |
|
|
|
| |
PHHP1017 |
|
Electronic Scale Package - High Profile Only |
| |
|
|
Modifications to the Machine frame to accept the scale system.
4-Point load cell system for accurate weight measurement.
Includes Electronic Digital Display.
Nema rated Indicator Enclosure.
Duplex RS232 serial communication port for connection to a PC or serial printer. |
| |
|
|
|
| |
PHHP1015 |
|
Dark Load Special Auto-Height Photo Eye |
| |
|
|
Replaces standard photoeye.
Background suppression for dark(black,green, brown colours) and/or shiny loads. |
| |
|
|
|
| |
PHHP1002 |
|
Extended Tower - 96" Wrap Height |
| |
|
|
Replaces standard wrap height of 80".
|
| |
|
|
|
| |
PHHP1002A |
|
Extended Tower - 104" Wrap Height |
| |
|
|
Replaces standard wrap height of 80". |
| |
|
|
|
| |
PHHP1002B |
|
Extended Tower - 116" Wrap Height |
| |
|
|
Replaces standard wrap height of 80". |
| |
|
|
|
| |
PHHP1014 |
|
Dual Turntable Option for PHP |
| |
|
|
Extra 48" x 48" Octagonal Turntable.
Toggle switch to select active table.
|
| |
|
|
|
| |
PHHP1000 |
|
Anti Skid Table Surface |
| |
|
|
|
| |
PHHP1001 |
|
Base Extension for High Profile ( Price per Foot ) |
| |
|
|
Maximum 3-Foot Extension available.
Applies to 2100, 2150, 2300 models. |
| |
|
|
|
| |
PHHP1006 |
|
PHP Split Base (Tower Mounted Separately) |
| |
|
|
Allows for larger load sizes to be wrapped on the system.
Includes extended wiring harness from turntable to the control tower. This is fed in flex conduit and is the customers responsibility to protect it from damage by foot traffic.
|
| |
|
|
|
| |
PHHP1007 |
|
PHP Upgrade 6,000 Lbs Turntable Capacity |
| |
|
|
6,000 lbs Weight Capacity.
3/8" thick turntable. |
| |
|
|
|
| |
PHHP1008 |
|
PHP Upgrade 67" Dia. Round Turntable |
| |
|
|
Replaces standard 48" Octagonal Table.
Allows for large load sizes on the table, same std. capacity. |
| |
|
|
|
| |
PHHP1009 |
|
Hinged Fold Down Tower Option |
| |
|
|
Note: Included with 116" Tower extension only.
Optional for 96" and 104" extensions. |
| |
|
|
|
| |
PHHP1013 |
|
Custom Paint Colour for Basic Semi Automatic |
| |
|
|
Enamel paint for base machine. (Paint chip and/or spec. required)
Note: Applicable for PLP and PHP basic models. (Options may add extra cost). |
| |
|
|
|
| |
PHHP1013A |
|
Steel-IT Paint for Basic Semi Automatic |
| |
|
|
Note: Applicable for PLP and PHP basic models. (Options may add extra cost). |
| |
|
|
|
| |
PHHP1005 |
|
Automatic End of Cycle Film Cut-Off |
| |
|
|
This time saving feature allows the operator to remain on his lift, the film is cut automatically. |
| |
|
|
|
| |
PHHP1016 |
|
Cold Temperature Package # 1 to 0 Degrees C° (32F) *) |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures.
Note: Machine must be left "on" to prevent condensation problems.
* certain options not offered with Cold Pkg.
|
| |
|
|
|
| |
PHHP1016A |
|
Cold Temperature Package # 2 to - 25 Degrees C° (-13F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures.
Panel Insulation.
Special cold temp rated wiring Note; machine must be left "on" to prevent condensation problems.
* Certain options not offered with Cold Pkg.
|
| |
|
|
|
| |
PHHP1016B |
|
Cold Temperature Package # 3 to - 33 Degrees C (-29F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures.
Tower is completely insulated.
Special cold temp rated wiring.
Motor Heaters for all (3) Motors.
Note: Machine must be left "on" to prevent condensation problems.
* Certain options not offered with Cold Pkg.
|
| |
|
|
|
| |
PHHP1007A |
|
PHP-2300 Upgrade 8,000 Lbs Turntable Capacity |
| |
|
|
8,000 lbs Weight Capacity.
Upgrade for Motor HP and heavy-duty transmission - 1HP.
Extra table support caster - 14x. |
| |
|
|
|
| |
PHLP1021 |
|
Electric Top Platen for Variable Load Height. |
| |
|
|
Stabilizes unstable loads for wrapping. Once the load is placed on the wrapper table, the top platen is lowered down onto the top of the product to be wrapped. This foam covered platen ensures that the load will not tip or move during the wrapping cycle. With the load fully secured, the wrapping cycle can commence. Once wrapped the top platen is raised to allow for pallet removal.
Foam padded top platen. |
| |
|
|
|
| |
PHLP1002B |
|
Touchscreen Panel Upgrade |
| |
|
|
Touchscreen Control. Alarm Diagnostics and Alarm History.
Password Protected Wrap settings.
Selectable Over-Wrap Adjustment.
Multiple Wrap Patterns including Wrap Up/Down, Wrap up only and Top Cover Pause. |
| |
|
|
|
| |
PHLP1022 |
|
Single "Rope Down" Pneumatic Roping |
| |
|
|
A pneumatic cylinder with a roping assembly is mounted on the film carriage. During the cycle, a solenoid valve activates the roping mechanism allowing the film to be gathered, forming a rope at the bottom of the carriage frame.
This reinforces the film to the pallet, in the case of tab folding, holds the tabs to the load more securely than just a film web. ** If spiral wrap roping of the load is required over the height of the load, additional charges will apply for added features.
Includes roping on/off control on the panel. |
| |
|
|
|
| |
PHLP1022A |
|
Dual "Rope Up/Down" Pneumatic Roping |
| |
|
|
A pneumatic cylinder with a roping assembly is mounted on the film carriage. During the cycle, a solenoid is engaged allowing the film to be gathered, forming a rope at the bottom or top of the carriage frame. This reinforces the film to the pallet, in the case of tab folding, holds the tabs to the load more securely than just a film web.
Includes roping on/off control . |
| |
|
|
|
| |
PHLP1036 |
|
CSST - Film Carriage Modifications |
| |
|
|
Modified carriage access door with electrical interlocked switch.
|
| |
|
|
|
