Stretch Wrappers by Phoenix
  Phoenix Non Conveyorized Rotary Turntable Automatic Pallet Wrapper
 

PLPA-2150

 
 
OPTION CODE
 
OPTION DESCRIPTION
       
 
PHLP1003
  Standard Duty Loading Ramp
     
2ft flat portion, 4ft incline x 48" wide - can be mounted on either of the three sides of the turntable.
       
 
PHLP1009
  Extended Tower - 92" Wrap Height
     
Usually applied for Pit Mounting applications.
       
 
PHLP1009A
  Extended Tower - 104" Wrap Height
     
Replaces standard wrap height of 80".
       
 
PHLP1009B
  Extended Tower - 116" Wrap Height
      Replaces standard wrap height of 80".
       
 
PHLP1019
  Dark Load Special Auto-Height Photo Eye
     
Replaces standard photoeye.
Background suppression for dark(black,green, brown colours) and/or shiny loads.
       
 
PHLP1007
  30" Powered Pre-Stretch Carriage Upgrade
     
Replaces 20" Standard.
       
 
PHLP1003A
 
Special Ramp for Scale
     
2ft flat portion, 4ft incline x 48" wide - can be mounted on either of the three sides of the turntable.
       
 
PHLP1020
 
Cold Temperature Package # 1 to 0 C° (32F) *
     
Thermostatically controlled panel heater to maintain proper operating temperatures.
Note: machine must be left "ON" to prevent condensation problems.
* certain options not offered with Cold Pkg.
       
 
PHLP1018
 
Custom Paint Colour for Basic Semi Automatic
     
Enamel paint for base machine (paint chip and/or spec. required)
Note: applicable for PLP and PHP basic models (options may add extra cost).
       
 
PHLP1018A
 
Steel-It Paint for Basic Semi Automatic
     
Note: applicable for PLP and PHP basic models (options may add extra cost).
       
 
PHLP1002A
  PLC Control Upgrade - Touchscreen Panel Controls
     
The Microprocessor controlled Touch Panel is replaced with an Omron PLC with pushbutton and selector switches. (On models 2150, & 2300 only)
       
 
PHLP1017
 
Electronic Scale Package
     
Modifications to the Machine frame to accept the scale system with reinforcing base plate and structural tubing.
4-Point load cell system for accurate weight measurement. Precise to 1lb with percentage of error at 1/10%.
Electronic Digital Display.
Stainless Steel washdown Nema 4X Indicator Enclosure.
RS232 serial bi-directional communication port.
       
 
PHLP1021
 
Electric Top Platen for Variable Load Height.
     
Stabilizes unstable loads for wrapping. Once the load is placed on the wrapper table, the top platen is lowered down onto the top of the product to be wrapped. This foam covered platen ensures that the load will not tip or move during the wrapping cycle. With the load fully secured, the wrapping cycle can commence. Once wrapped the top platen is raised to allow for pallet removal.
Foam padded top platen.
       
 
PHLP1022
 
Single "Rope Down" Pneumatic Roping
     
A pneumatic cylinder with a roping assembly is mounted on the film carriage. During the cycle, a solenoid valve activates the roping mechanism allowing the film to be gathered, forming a rope at the bottom of the carriage frame.
This reinforces the film to the pallet, in the case of tab folding, holds the tabs to the load more securely than just a film web. ** If spiral wrap roping of the load is required over the height of the load, additional charges will apply for added features.
Includes roping on/off control on the panel.
       
 
PHLP1036
 
CSST - Film Carriage Modifications
     
Modified carriage access door with electrical interlocked switch
       
 
   
CONTROL PANEL
Phoenix PLPA-2150 Stretch Wrapper Pushbutton Control Panel
Pushbutton Control Panel with Variable Speed Drive.
 
FILM CARRIAGE
Phoenix PLPA-2150 Stretch Wrapper Easy Threading Prestretch Film Carriage
20" Easy Threading powered prestretch film carriage.
 
TURNTABLE DRIVE
Phoenix PLPA-2150 Stretch Wrapper Turntable
67" Diameter Turntable c/w 26 Heavy Duty Casters on Welded Supports.
 
TOWER SYSTEM
Phoenix PLPA-2150 Stretch Wrapper Tower and Carriage Lift System
Carriage Lift and Tower Systems.
 
CLAMP CUT AND WIPE
 
Phoenix PLPA-2150 Stretch Wrapper Clamp Cut and Brush
Pneumatic Controlled Cut & Wipe System
Automatically cuts the film and applies the film tail to the load.