| |
|
|
|
| |
PHLP1003 |
|
Standard Duty Loading Ramp |
| |
|
|
2ft flat portion, 4ft incline x 48" wide - can be mounted on either of the three sides of the turntable. |
| |
|
|
|
| |
PHLP1004B |
|
Heavy Duty Loading Ramp (6,000 Lb Capacity) for Transpallet Use |
| |
|
|
2ft flat portion, 4ft incline x 48" wide - can be mounted on either of the three sides of the turntable. |
| |
|
|
|
| |
PHLP1002A |
|
PLC Control Upgrade - Touchscreen Panel Controls |
| |
|
|
The Microprocessor controlled Touch Panel is replaced with an Omron PLC with pushbutton and selector switches. (On models 2150, & 2300 only) |
| |
|
|
|
| |
PHLP1009 |
|
Extended Tower - 92" Wrap Height |
| |
|
|
Usually applied for Pit Mounting applications.
|
| |
|
|
|
| |
PHLP1008 |
|
Anti Skid Table Surface |
| |
|
|
|
| |
PHLP1009A |
|
Extended Tower - 104" Wrap Height |
| |
|
|
Replaces standard wrap height of 80". |
| |
|
|
|
| |
PHLP1009B |
|
Extended Tower - 116" Wrap Height |
| |
|
|
Replaces standard wrap height of 80".
|
| |
|
|
|
| |
PHLP1019 |
|
Dark Load Special Auto-Height Photo Eye |
| |
|
|
Replaces standard photoeye.
Background suppression for dark(black,green, brown colours) and/or shiny loads. |
| |
|
|
|
| |
PHLP1011 |
|
Automatic End of Cycle Film Cut-Off |
| |
|
|
This time saving feature allows the operator to remain on his lift, the film is cut automatically. |
| |
|
|
|
| |
PHLP1007 |
|
30" Powered Pre-Stretch Carriage Upgrade |
| |
|
|
Replaces 20" Standard.
|
| |
|
|
|
| |
PHLP1016 |
|
Hinged Fold Down Tower Option |
| |
|
|
Note: Included with 116" Tower extension only.
Optional for 96" and 104" extensions. |
| |
|
|
|
| |
PHLP1003A |
|
Special Ramp for Scale |
| |
|
|
2ft flat portion, 4ft incline x 48" wide - can be mounted on either of the three sides of the turntable. |
| |
|
|
|
| |
PHLP1020 |
|
Cold Temperature Package # 1 to 0 C° (32F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures.
Note: machine must be left "ON" to prevent condensation problems.
* certain options not offered with Cold Pkg. |
| |
|
|
|
| |
PHLP1020A |
|
Cold Temperature Package # 2 to - 25 Degrees C° (-13F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures - Panel Insulation.
Special cold temp rated wiring.
Note: machine must be left "ON" to prevent condensation problems.
* certain options not offered with Cold Pkg.
|
| |
|
|
|
| |
PHLP1020B |
|
Cold Temperature Package # 3 to - 33 C° (-29F) * |
| |
|
|
Thermostatically controlled panel heater to maintain proper operating temperatures - Tower is completely insulated.
Special cold temp rated wiring.
Motor Heaters for all (3) Motors.
Note: machine must be left "ON" to prevent condensation problems.
* certain options not offered with Cold Pkg. |
| |
|
|
|
| |
PHLP1018 |
|
Custom Paint Colour for Basic Semi Automatic |
| |
|
|
Enamel paint for base machine (paint chip and/or spec. required)
Note: applicable for PLP and PHP basic models (options may add extra cost). |
| |
|
|
|
| |
PHLP1018A |
|
Steel-It Paint for Basic Semi Automatic |
| |
|
|
Note: applicable for PLP and PHP basic models (options may add extra cost). |
| |
|
|
|
