Phoenix Non-Conveyorized High Profile Automatic Stretch Wrap Machine
PHPA-2150
Control Panel
* Customization Possible
Here’s how we design our Controls to stand-out.
Omron PLC with pushbuttons / switches.
Independent up/down speed adjustments to realize film savings.
This feature is often overlooked, but provides more film application control and realized film savings. More expensive automatic wrappers provide this feature and we provide it with our Semi-automatics also as it allows you to start the cycle by moving upward at full speed. This ensures the load gets a spiral wrap applied while getting the carriage to the top of the load as fast as possible. This allows you to contain the top of the load which is typically the most unstable. Once the top wraps are complete you are then able to travel downward at a reduced wrapping speed to ensure that the required film is applied to contain the load.
Most competitors provide only one speed, forcing you to move upward at the same slow rate as on the way down causing more film to be applied unecessarily. Again adding extra cost to each pallet wrapped
Variable speeds for up/down and table motors.
Separate Top & Bottom wrap counters from 1-9.
This provides the maximum flexibility for all your wrapping needs. Most competitive models offer a single 1 to 3 wrap selector switch which limits your capability to meet your customers requirements. For Example:
• Many pallet loads require more than just three wraps applied to the top. Many retail customers supply specs that require 4 or 5 revolutions on the top. This is not possible with many competitive models.
• Very often different amounts of film need to be applied to the top of the load and the bottom. You may require 3 top waps and only 1 bottom wrap. This again is not possible with competitive models as you are forced to put the same amount of film on the bottom as you did on the top. Applying extra film where it is not needed dramatically increases your film cost per pallet.
Don't be limited in your ability to meet any of your customers requirements. With Phoenix, we understand the demands customers face and provide this flexibility.
Multiple wrap patterns to select from.
Wrap Up/Down and Top Cover Pause, Cycle Pause and others just give you added flexibility to meet your customer's requirements.
Pushbutton and Selector Switches.
Selectable Overwrap Height.
Film Force to Load (Tension) Control.
Reinforce wrap button applies more film anytime during the wrap cycle when extra film is needed.
Power on/Off, Large E-Stop, Cycle Pause and Jog Controls for Carriage up/down and turntable
What you might see with competitive models:
Single carriage speed up or down,..no adjustments on speeds.
Limited wrap selections (top and bottom).
Film tension control adjusted mechanically /electrically on the carriage.
CONTROL PANEL
Pushbutton Control Panel with Variable Speed Drive.
FILM CARRIAGE
20" Easy Threading Powered Prestretch Film Carriage.
TURNTABLE DRIVE
Turntable c/w 9 Heavy Duty Casters on Welded Supports.
TOWER SYSTEM
Dual chain Carriage Lift and Tower Systems.
CLAMP CUT AND BRUSH
Pneumatic Controlled Cut & Wipe System automatically cuts the film and applies the film tail to the load.
